9 |
P a g e
Operation
Remote Display
Status LED’s
Good
(Green)
No Active Alarms.
Caution
(Yellow)
Active Minor Alarm, check system for details.
Alarm
(Red)
Active Major Alarm, check system for details.
Comm. LED
OFF
Communication is working.
Flashing
Communication is NOT working.
Remote Display is Out-of-Range
2
, Transmitter is disconnected
OR controller is powered off.
ON
Remote Display is attempting to pair with a local
transmitter in proximity.
Power
Switch
I
Remote Display Powered ON
O
Remote Display Powered OFF
NOTE 1: Not Compatible with MOD-RAM-BWS. The module gets detected as a “Remote Alarm”
on standard output and high output controllers during the start-up sequence.
NOTE 2: The Wireless Range can vary based on the installation environment; objects, walls
and metal obstacles can interfere and degrade the wireless signal. Best suited for residential
applications.
Pairing an Additional Remote Display
To pair an additional Remote Display to a currently installed Transmitter:
Step 1) Power ON the Additional Remote Display within 5m (15ft) proximity to the
transmitter; by simply plugging the AC/DC wall adapter into the Power Port on
the Remote Display and sliding the switch to the ON position.
Step 2) The Remote Display performs self-pairing with the local transmitter. Once paired
the Communication LED on the Remote Display will turn OFF and a Status LED
will turn ON.
Step 3) Once pairing is complete, relocate the Remote Display to any location
2
.
