8 |
P a g e
WATER QUALITY MONITOR MODULE
MODEL # MOD-SHERPA-BWS
The module comes with a Transmitter and a Remote Display. The Transmitter connects to a
standard output and high output controller and transmits the controller’s status wirelessly
to the Remote Display. Every Transmitter and Remote Display is paired together and uses
encryption to create a reliable and secure communication link between the two devices. Every
Transmitter supports up to five Remote Displays. Additional Remote Displays can be purchased
and installed separately. Refer to ‘Pairing an Additional Remote Display’ for additional Remote
Display installation.
Installation
Step 1) Power off the UV system controller.
Step 2) Plug the male plug of the Transmitter into the IEP (Infinite Expandability Port) on
the controller, or into any other module that contains an IEP (sensor, 4-20 mA
module, solenoid module, etc.) and then restart the system
Note 1
.
Step 3) To Receive the UV system
controller’s status on the
Remote Display, plug the AC/
DC wall adapter into the Power
Port on the Remote Display (5V
Max) and slide the switch to
the ON position.
Back of
Remote
Display
Transmitter
Remote Display
50m/164ft
(Note 2)
Good
Caution
Alarm
Comm
Active
Water Quality
Monitor
Sensor IEP
Installation
IEP
connection
BWS5/BWS6
Series controllers
BWS5-C/6-C
Series controllers
IEP
connection
IEP
connection
