Electrical installation
The power supply must meet the specifications on the product.
The pump is intended to be used with either a weather-proof
cable connector or permanently connected to the fixed wiring
in the main system other than by means of a plug and socket.
The cores in the supply cable are coloured in accordance with the following
code:
Brown = Live, Blue = Neutral, Green/Yellow = Earth.
The electric cable is permanently connected and sealed in the motor body.
If the supply cable is damaged the pump must not be used.
Do not use the supply cable to lift the pump as this may cause damage.
WARNING - THIS PUMP MUST BE EARTHED
A Residual Current Device (RCD), also know as the Residual
Current Circuit Breaker (RCCB), with a tripping current not
exceeding 30mA must be installed in the supply circuit.
A means of disconnection from the supply having a contact separation
of at least 3mm in all poles must be incorporated in the fixed wiring.
INSTALLATION
6
IMPORTANT:
Please note all electrical work on garden lighting and
power installations must comply with part P of the building regulations.
Failure to comply is a criminal offence. If the installation of this product
is not carried out by a competent electrician who is registered under the
Part P self-certification scheme then you must notify the local building
control department before work begins. For further information and
guidance on this matter and other electrical installations in your home
that might be covered by the relevant legislation, contact your local
authorities building control department.
