BLADEZ POWERMILL BF-6730 HRP, Руководство пользователя

Страница: 6 / 30

6
ASSEMBLY INSTRUCTIONS CONTINUED
Illustrations of treadmill assembly:
A minimum of two people are
required to assemble this treadmill.
Also, read and understand all
instructions thoroughly before
assembling the treadmill.
Failure to do so could result in injury.
1. Use 2 bolts (a) to secure the
bottle holder (J) to the right side
upright (D).
NOTE: Bottle hold can be placed
onto either the left (C) or right
(D) side uprights.
You will find two holes on one
side and that is the inner side of
the left and right uprights
2.
Tie the attached black guide wire
to the wire connector and feed
the wire slowly through the
bottom left upright (C) opening
and pull the connector from the
top. Be sure not to pull on the
wire too hard if it does not feed
easily.
Then secure the left (C) and right
uprights (D) onto the base frame
with 2 bolts (b) to the front side
and 4 bolts (d) to the sides using
5mm allen wrench as shown.
Seal all those 6 holes with screw
covers (G) on top
Note: Leave all handlebar bolts
loose until console display has
been installed, then tighten all of
the handlebar bolts.