Bladez Corp. • 20155 Ellipse • Foothill Ranch, CA 92610 • (866) 325-2339 • www.ebladez.com
Page 7
Rear Basket Kit
(NOTE: Included with model PB-SM 817 ONLY!)
The model PB-SM 817 comes with a rear basket
that will connect to the back of the seat post. In
order to install the rear basket simply slide the
basket onto the bracket on the rear of the seat post
(Fig 6).
Integrated Seat Base
(NOTE: Seat included with models PB-SM 816S
and PB-SM 817 ONLY!)
The XTR-SE comes with a seat base built in to the
scooter. Having this base built in to the scooter will
make it easy to install and uninstall the seat
quickly and easily. To install the seat, remove the
pin from the side of the scooter (Fig. 7). Then
place the seat post into the base on the deck. (Fig.
8) Replace the pin in the side of the scooter to
secure the post. Place the seat on the seat post
and adjust to your preference and tighten the nut
on the underside of the seat. You may now adjust
the seat to your preferred height. You are ready to
use your seat kit.
Batteries
The batteries on the XTR-SE come stored in a bag
and are removable. This also gives you the option
to buy a second set of batteries which you can
swap when one set of batteries starts to run low.
For more information about hot-swappable
batteries contact us on the web at
H
www.ebladez.com or call us toll free at (866) 325-
2339.
