17
6. OPERATION
■
Starting and Driving
1.
Make sure the seat is properly installed.
2.
Make sure the tiller has been properly secured.
3.
Make sure the armrest has been returned to the lowest position.
4.
Turn the power switch to “ON”. If necessary, turn on the headlights.
5.
Check battery meter to see if there is enough power for your trip. If you have any
doubts, please charge the battery before leaving.
6.
Set to the desired speed on the speed dial.
7.
Be sure the forward / reverse speed lever is in working condition.
8.
Make sure the electromagnetic brake is in working condition.
Driving speed
The speed scale is printed on speed dial label, ranging from left (Slowest speed) to
right. (Highest speed). There is also a high/low speed dial which has two modes of
max speed setting “H” and “L”.
!
ATTENTION
1. Do not push both Right Hand & Left Hand side speed levers simultaneously. This
might lead you to be unable to control your vehicle.
2. Do not turn the power switch to OFF while driving. This will lead to an emergency
stop and possible injury.
3. Do not set to highest speed while driving indoors.
4. Do not adjust speed dial while driving, the sudden change of speed may endanger you
and cause the failure of your vehicle.
5. Do not place magnetic devices near the control panel. This could affect the safe
operation of your vehicle.
6. Be careful while driving in heavy traffic or crowded areas.
7.
While reversing in reverse, be aware of people or objects around you.
Speed Scale
Circumstances of Recommend speed
Left side
♦
Speed equivalent to walking slowly
♦
Use on an incline or decline
♦
Use while driving indoors or in a narrow space
Between left
and right
♦
Speed equivalent to walking normally
♦
Use while driving outdoors on flat ground
Right side
♦
Speed equivalent to walking quickly
♦
Use when driving in an open space.
Содержание DKS320 EXECUTIVE
Страница 14: ...14...