BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
• Phone 949-206-8152 • Fax 949-206-0013
6
ASSEMBLY INSTRUCTIONS CONTINUED
A minimum of two people are required
to assemble this treadmill. Also, READ
and understand ALL INSTRUCTIONS
thoroughly BEFORE ASSEMBLING
the treadmill.
1.
Tie the Lower Control Wire of
the Main Frame (B) with the
Guide Thread of the Right
Upright (D), pull the wire into
the Upright, and secure with
wire clip, then insert into the
Upright.
2.
Secure the left (C) and right (D)
uprights onto the treadmill base
with 8 (a) bolts and washers (b).
* Ensure that the wire is not pinched
between the upright and the treadmill
base when securing the upright
3.
After the Uprights are tightened,
pull out the Control Wire that
has been threaded into the
Upright to the position shown in
the drawing at the right, then
attach the Side Covers (F, G)
onto the Frame, and tighten
with Screws (d).
