Blade FPV Nano QX Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 29

background image

26

EN

FCC Information

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

CAUTION:

Changes or modiﬁ cations not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with
the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.

IC Information

IC ID: 12280A-125X. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

Country of Purchase

Horizon Hobby

Contact Information

Address

United Kingdom

Service/Parts/Sales:
Horizon Hobby Limited

[email protected]

Units 1–4 , Ployters Rd, Staple Tye
Harlow, Essex, CM18 7NS, United
Kingdom

+44 (0) 1279 641 097

Germany

Horizon Technischer Service

[email protected]

Christian-Junge-Straße 1
25337 Elmshorn, Germany

Sales: Horizon Hobby GmbH

+49 (0) 4121 2655 100

France

Service/Parts/Sales:
Horizon Hobby SAS

[email protected] 11 Rue Georges Charpak

77127 Lieusaint, France

+33 (0) 1 60 18 34 90

China

Service/Parts/Sales:
Horizon Hobby – China

[email protected]

Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

+86 (021) 5180 9868

FPV System:

FCC ID: 2ABYQFSV1251.

Nano QX:

This product contains a radio transmitter with wireless
technology which has been tested and found to be compli-
ant with the applicable regulations governing a radio trans-
mitter in the 2.400GHz to 2.4835GHz frequency range.

«
...
24
25
26
27
28
...
»

Содержание FPV Nano QX






























Отзывы:

Нет отзывов

Похожие инструкции для FPV Nano QX

Бренд: Veeniix Страницы: 44

Бренд: Galaxy Страницы: 8

Бренд: LRP Страницы: 37

Control FROXXIC

Бренд: REVELL Страницы: 14

Бренд: Traxxas Страницы: 4

Бренд: ParaZero Страницы: 4

Бренд: YUNEEC Страницы: 6

Бренд: Propel Trampolines Страницы: 8

Бренд: Skynet Страницы: 16

Бренд: Ripmax Страницы: 6

Бренд: Prime Страницы: 8

Бренд: Propel Trampolines Страницы: 6

Zipp Nanocopter

Бренд: Propel Trampolines Страницы: 6

Бренд: Propel Trampolines Страницы: 8

Бренд: Aerix Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды