BLADDERSCAN BVI 3000 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 72

BLADDERSCAN BVI 3000 Скачать руководство пользователя страница 13

5

Operations & Maintenance Manual: Important Information

Cleaning is critical to ensuring the component is ready for disinfection. Failure to properly clean the

device could result in a contaminated instrument after completing the disinfection procedure.

WARNING

In order to maintain electrical safety, use only the provided medical‑approved power supply, battery

charger, and batteries.

WARNING

To reduce the risk of electrical shock, use only the accessories and peripherals recommended by

Verathon

®

.

WARNING

No modification of this equipment is allowed.

WARNING

The battery charger, power supply, and power cables are not intended for patient contact. Ensure

six feet (two meters) is maintained between the patient and these components.

WARNING

Risk of explosion, fire, or serious injury.

The BladderScan BVI 3000 system is battery‑powered.

Failure to note the following when handling the battery may result in serious injury or damage:
• Never short‑circuit the battery by bringing the battery terminals into contact with any other

conductive object.

•  Never expose the battery to abnormal shock, vibration, or pressure.
•  Do not disassemble, heat above 60°C (140°F), or incinerate the battery.
•  Keep battery out of reach of children and in original package until ready to use.
•  If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard

it immediately. Always dispose of used batteries in compliance with all applicable laws and

regulations.

• Put insulating tape, such as cellophane tape, on the electrodes during transportation in order to

avoid a possible short circuit, fire, or electrical shock.

WARNING

«
...
11
12
13
14
15
...
»

Содержание BVI 3000









































































Отзывы:

Нет отзывов