04
Caution
Caution
Before use the product, check if operation and video recording goes well.
Installation and Product Management
•
Keep the camera lens clean by preventing dust or foreign substance from coming into contact with the lens. Otherwise, this may result in video
distortion. So keep the area clear around the installed camera. If another object is placed around, it can be reflected from the window.
So do not put another object around the installed product.
•
If installation location of the product is changed, it may not record properly even if it worked after initial installation.
Therefore, install the product firmly and do not give an excessive shock or force to move the product
.
•
Continuous removal of the bracket from the windshield may cause weakening of the adhesive strength
and new adhesive pads should be used to prevent damage. Please be cautious when install the product.
•
Please check the position of SD card before inserting.
•
In the case of using the power from the vehicle
(DC fused power)
, please disconnect the power cable if you do not use the product for a long time.
(It may cause discharge the battery.)
•
Do not switch power off while firmware is upgrading. It may cause malfunctioning
.
•
Long term use of this product or in case of severe vibration may cause change in angle or location of product.
Correct the angle or location of product while stop on a flat location.