Blackrock Microsystems Pro60, Руководство по программированию, Страница: 8 / 26

Command
(ASCII)
Command
(hex)
Function
<ESC> “F” lh ll 1B 46 lh ll Forwards paper feed by l lines where l = (lh * 256) + ll
This command can only be given at the start of a line or will be
ignored. L must be less than 2400, this equals 300mm.
<ESC> “\” lh ll 1B 5C lh ll Backwards paper feed by l lines where l = (lh * 256) + ll
This command can only be given at the start of a line or will be
ignored. L must be less than 2400, this equals 300mm.
<ESC> “N” ph
pl 1B 4E ph pl Absolute TAB from the left to the horizontal pixel position p,
where p = (ph * 256) + pl
p may range from 0 to 383.
This positions the print start position to the specified dot on the
line.
<ESC> “R” ph
pl 1B 52 ph pl Relative TAB forwards or reverse by p pixels where p = (ph *
256) + pl
p is defined as an integer number and may have positive and
negative values.
6.3 Formatting Characters
6.3.1 Selecting Character Sizes
Command
(ASCII)
Command
(hex)
Function
<ESC> “P” n 1B 50 n Select character set n.
All fonts can be mixed within the same line.
Set number Char Matrix Chars per Line
1 16 * 24 24
2 9 * 22 42
3 7 * 16 54
4 12 * 24 32
<ESC> “H” “n” 1B 48 n Print single/double/triple height characters. The parameter n
may be specified in the range 0 to 7; 0 = Normal height; 1 =
Double height; 2 = Triple height etc.
<ESC> “W”
“1” 1B 57 31 Double print width. This command is valid until cancelled.
<ESC> “W”
“0” 1B 57 30 Normal print width. This command is valid until cancelled.
6.3.2 Character Spacing & Colour