Blackrock Microsystems Pro60, Руководство по программированию, Страница: 5 / 26

The last item in the table shows how to change mode and access the OPD menu.
Key 'ENTER' Key 'NEXT' Action
Pressed Not Pressed Feed paper one line
Held down for more than 2s Not Pressed Continuous paper feed
Pressed during power on for
less than 1 s Not Pressed Reactivation, no paper feed
Held down during power on for
more than 2s, with paper
detected. Not Pressed Retrieval of T0 (self test)
Held down during power on for
more than 2s, with no paper
detected. Not Pressed Set in hex dump mode
Pressed whilst in hex dump
mode Not Pressed End hex dump mode
Not Pressed Key released after less than 1s
in normal paper mode Retrieval of T1 (form feed)
Not Pressed Key held down for greater than
3s Retrieval of T1 (immediate
power down)
Pressed Pressed Calls OPD menu
4 OPD Menu
The Pro60 may be setup by use of the buttons on the front face of the unit. By pressing the buttons
as instructed by the prompts printed on the paper. Various parameters can be set by use of the OPD
(On Paper Display) menus.
The OPD menu is entered by pressing, holding, then releasing the ENTER and NEXT buttons. A
'welcome' print will be made on the paper, showing the menu of settings.
The menu may be exited by pressing again the ENTER and NEXT to save and exit, or it may be left
for a period of time (10 minutes) after which it will automatically exit.
Items that may be changed are;
Density
20, 25 , 30, 35, 40, 45, 50, 90 (2 ply)
Speed/Quality
Low(32)/Medium, Medium(64)/Medium, Medium(64)/Low , High(96)/Low
Interface
Baudrate
COM-Params
Sleep Time
Off, 5s , 30s, 1m, 10m, 1h, 12h, 32h