Blackridge 180 Hi-Flow Скачать руководство пользователя страница 3

2

3

iNTrodUcTioN

Dear Customer,

Thank you for purchasing this compressor 
which has passed through our extensive quality 

assurance processes. Every care has been taken 

to ensure that it reaches you in perfect condition.  

However, in the unlikely event that you should 
experience a problem, or if you require any 

assistance please do not hesitate to contact us;

if you have a problem, call customer 
service do not return this compressor 
to the place of purchase.

cUSTomer Service

Australia: 1300 660 457
New Zealand: 0800 474 876
operating times: monday – Friday  
8.30am - 5.30 pm 
Australian Eastern Standard Time (AEST)

expreSS WArrANTy STATemeNT 

compreSSor groUp

You are not required to do anything to register 
your compressor purchase.  Please attach the 

purchase receipt to this manual and ensure both 

are kept safe.  We hope you enjoy your new 

compressor, and if you have any problems call 
customer service on the above phone numbers.  
Do not return to place of purchase.

Smart Marketing Group Pty Ltd (SMG) 

warrants that this compressor will be free from 

manufacturing faults or defects for 12 months 
from the date of purchase, providing original 
purchase receipt is kept and shown when needed 

and is subject to the terms and conditions below.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

• Call customer service, phone number at the top.
• Ensure you have the following: Original purchase 

receipt, Model of compressor, Serial number of 

compressor.

• Discuss the issue.
• Customer service will advise which authorised 

service agent to take the compressor to provided 
the issue is a warranty one.

• Take compressor to authorised service agent 

for repair.

What is not covered.

• Commercial use of compressor.
• Use of compressor in a commercial premises.
• Damage or deterioration due to transport.
• Damage caused by negligence, misuse, abuse or 

accident or incorrect voltage and wattage.

• Any corrosion or rusting.
• Damage caused by incorrect set up and start up.
• Replacement parts due to general wear and tear.
• Compressors with serial number defacement, 

modification or removal.

• Compressors which have been serviced by other 

than an authorised SMG service agent.

• Compressors with no original purchase receipt.
• Compressors which have been on sold, not 

original purchaser.

• Damage due non-servicing of compressor as is 

required by this manual.

• Blockages / damage caused by dust, dirt, 

spiders webs or insects.

• Damage caused by the incorrect fitting 

 

of accessories.

• Damage caused by overloading, overworking 

the compressor.

• Damage to attached equipment or third party 

accessories.

• Damage caused by attached equipment or third 

party accessories.

Содержание 180 Hi-Flow





















Отзывы: