102-A00 page 2/16
SAFETY DATA
Disconnecting fluid or pressure
containment components during pump
operation can cause serious personal
injury, death or major property damage
Failure to disconnect and lockout
electrical power before attempting
maintenance can cause shock, burns or
death
Hazardous pressure
can cause personal
injury or property
damage
Hazardous voltage.
Can shock, burn or
cause death.
Failure to disconnect and lockout
electrical power or engine drive before
attempting maintenance can cause
severe personal injury or death
Operation without guards in place can
cause serious personal injury, major
property damage, or death.
Hazardous
machinery can
cause serious
personal injury.
Do not operate
without guard
in place
If pumping hazardous or toxic fluids,
system must be flushed and
decontaminated, inside and out, prior to
performing service or maintenance
Failure to relieve system pressure prior
to performing pump service or
maintenance can cause serious
personal injury or property damage.
Hazardous or toxic
fluids can cause
serious injury.
Hazardous pressure
can cause serious
personal injury or
property damage
Always use a lifting device capable of
supporting the full weight of the pump
assemblies.
Heavy assemblies
can cause personal
injury or porperty
damage.
PUMP DATA
PUMP IDENTIFICATION
A pump Identification tag, containing the pump serial number, I.D. number, and model designation, is attached to each pump. It is
recommended that the data from this tag be recorded and filed for future reference. If replacement parts are needed, or if
information pertaining to the pump is required, this data must be furnished to a Blackmer representative.
TECHNICAL DATA *
HXL6G
HXL8G
HXLJ8G
HXL10E
Maximum Pump
Speed
350 RPM
350 RPM
230 RPM
Maximum Operating
Temperature
300°F
(149°C)
300°F
(149°C)
300°F
(149°C)
Maximum Differential
Pressure
125 psi
(8.6 Bar)
150 psi
(10.3 Bar)
150 psi
(10.3 Bar)
Maximum Working
Pressure
150 psi
(10.3 Bar)
250 psi
(17.2 Bar)
250 psi
(17.2 Bar)
* Technical Data is for standard materials of construction.
Consult Blackmer Material Specs for optional materials of
construction.
INITIAL PUMP START UP INFORMATION
Model No. ______________________________________
Serial No. _____________________________________
ID No. ________________________________________
Date of Installation: _____________________________
Inlet Gauge Reading: ____________________________
Discharge Gauge Reading: _______________________
Flow Rate: _____________________________________
