BLACKMER HD942A, Инструкции по установке, эксплуатации и обслуживанию

Страница: 2 / 28

SAFETY DATA
CB9A-030 page 2/28
Flammable gas can
cause death, serious
personal injury or
property damage
Flammable gas and/or liquid can form
explosive mixtures with air causing
property damage, serious personal injury
or death
Hazardous pressure
can cause serious
personal injury or
property damage
Failure to relieve system pressure prior
to performing compressor service or
maintenance can cause serious
personal injury or property damage.
Hazardous
machinery can
cause serious
personal injury.
Failure to disconnect and lockout
electrical power or engine drive before
attempting maintenance can cause
severe personal injury or death
Hazardous voltage.
Can shock, burn or
cause death.
Failure to disconnect and lockout
electrical power before attempting
maintenance can cause shock, burns or
death
Hazardous or toxic
fluids can cause
serious injury.
If handling hazardous or toxic fluids,
system must be flushed and
decontaminated, inside and out, prior to
performing service or maintenance
Hazardous pressure
can cause serious
personal injury or
property damage
Disconnecting fluid or pressure
containment components during
compressor operation can cause
serious personal injury, death or major
property damage
Hazardous gases
can cause property
damage, personal
injury or death
Explosive gas can cause property
damage, personal injury, or death.
Extreme Heat can
cause personal injury
or property damage
Extreme heat can cause personal injury
or property damage
GENERAL INFORMATION
COMPRESSOR DATA
TABLE 1 - COMPRESSOR DATA Air-Cooled
Water-Cooled
HD942A
HDL942A
MAWP - psia (Bar) 350 (24.1)
Displacement CFM (m
3
/hr)
@ 350 rpm (Minimum Speed)
@ 835 rpm (Maximum Speed) * 52.5 (89.1)
125.1 (213)
Max. BHP (kw) 50 (37)
Maximum Discharge Temperature
350
°
F (176
°
C)
Rotation Direction Either Direction
Bore x Stroke, Two Double-Acting Cylinders in. (mm) 4.625 x 4 (117 x 102)
Type: Single-stage, vertical, air-cooled, non-lubricated, reciprocating compressor.
* NOTE: Reduce maximum speeds by 9% for continuous duty operation.