Blackmagicdesign UltraStudio Pro, Руководство по эксплуатации

Страница: 12 / 50

Blackmagic Software
12
Setting Blackmagic Preferences
NTSC setup
The NTSC composite video used in the USA, and some other countries uses 7.5% setup. However setup is
only used in composite video, but is never used in SDI video. Your UltraStudio Pro will handle adding and
removing setup from NTSC video automatically for you. The USA and countries that use 7.5% setup should
enable this setting; if you’re working in Japan and countries that don’t use this setup, leave this set to 0 IRE
setup. The PAL and high definition standards do not use this setup.
Progressive HD1080 video
By default, progressive HD1080 video frame rates are treated as progressive segmented frame,
i.e. 23.98PsF, 24PsF and 25PsF. If you enable
Use 1080p not 1080PsF
progressive HD1080 video frame
rates will be treated as true progressive, i.e. 23.98p, 24p and 25p.
Remove Field Jitter
“Remove field jitter when video is paused” allows UltraStudio Pro to display only a single field when paused,
while turning this mode off will display a complete frame in pause. Single field is similar to how Betacam SP
decks work when paused, eliminating field flicker from paused images.
If you’re doing work without interlaced video, such as animation, then you can turn this mode off
so you can see both fields in full resolution for best quality. Regardless of this setting, you always get the
correct full frame dual field output when in playback mode, as this setting only effects paused video.
NTSC Setup
1080p/1080PsF switch
Video Output Behavior