Blackmagic Design - Leading the creative video revolution
™
Windows XP
™
5. A message will appear requesting that you confirm this change to
the resolution. If your broadcast monitor appears to show the correct
resolution, click the “Yes” button. Then click the “OK” button in both
the Default Monitor window and finally in the Display Properties
window.
Note: There is an easier method for switching between HDTV
resolutions. Just use the Screen Resolution slider in the Display
Properties windows to move between resolutions. Unfortunately the
Screen Resolution slider cannot be used to switch to NTSC or PAL as
Windows XP hides resolutions below a certain size. That is why the
“List All Modes” window must be used to switch to standard definition
resolutions.
6. The SDI and analog outputs are always active on DeckLink cards.
If you need to switch the analog connections between composite and
component, use the DeckLink control panel located in “Control Panels.”
You can adjust your analog settings in the video tab of the DeckLink
control panel.
Note:
When using the DeckLink HD Pro video output in RGB 4:4:4 Dual Link
mode, the signal from the analog component outputs will be RGB, so switch
your broadcast monitor to RGB. You can still playback 8 and 10 bit YUV files, as
this setting only effects the video output setting. DeckLink HD Pro will translate
these files to RGB on playback in real time.
12
