background image

Warranty

41

12 Month Limited Warranty

Blackmagic Design warrants that this product will be free from defects in materials and workmanship for 
a period of 12 months from the date of purchase. If a product proves to be defective during this warranty 
period, Blackmagic Design, at its option, either will repair the defective product without charge for parts and 
labor, or will provide a replacement in exchange for the defective product. 

In order to obtain service under this warranty, you the Customer, must notify Blackmagic Design of the 
defect before the expiration of the warranty period and make suitable arrangements for the performance 
of  service.  The  Customer  shall  be  responsible  for  packaging  and  shipping  the  defective  product  to  a 
designated service center nominated by Blackmagic Design, with shipping charges pre paid. Customer 
shall be responsible for paying all shipping charges, insurance, duties, taxes, and any other charges for 
products returned to us for any reason. 

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or 
inadequate  maintenance  and  care.  Blackmagic  Design  shall  not  be  obligated  to  furnish  service  under 
this warranty: a) to repair damage resulting from attempts by personnel other than Blackmagic Design 
representatives to install, repair or service the product, b) to repair damage resulting from improper use 
or connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of 
non Blackmagic Design parts or supplies, or d) to service a product that has been modified or integrated 
with other products when the effect of such a modification or integration increases the time or difficulty 
of  servicing  the  product.  THIS  WARRANTY  IS  GIVEN  BY  BLACKMAGIC  DESIGN  IN  LIEU  OF  ANY 
OTHER WARRANTIES, EXPRESS OR IMPLIED. BLACKMAGIC DESIGN AND ITS VENDORS DISCLAIM 
ANY  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE. 
BLACKMAGIC  DESIGN’S  RESPONSIBILITY  TO  REPAIR  OR  REPLACE  DEFECTIVE  PRODUCTS  IS  THE 
WHOLE  AND  EXCLUSIVE  REMEDY  PROVIDED  TO  THE  CUSTOMER  FOR  ANY  INDIRECT,  SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER BLACKMAGIC DESIGN 
OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. BLACKMAGIC 
DESIGN  IS  NOT  LIABLE  FOR  ANY  ILLEGAL  USE  OF  EQUIPMENT  BY  CUSTOMER.  BLACKMAGIC  IS 
NOT LIABLE FOR ANY DAMAGES RESULTING FROM USE OF THIS PRODUCT. USER OPERATES THIS 
PRODUCT AT OWN RISK. 

© Copyright 2013 Blackmagic Design. All rights reserved. ‘Blackmagic Design’, ‘DeckLink’, ‘HDLink’, ‘Workgroup Videohub’, ‘Multibridge Pro’, 
‘Multibridge Extreme’, ‘Intensity’ and ‘Leading the creative video revolution’ are registered trademarks in the US and other countries. All other 
company and product names may be trade marks of their respective companies with which they are associated.

Warranty

Содержание Cinema Camera










































Отзывы: