manualshive.com logo in svg

BLACKHAWK! LITE 125 2.0, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
BLACKHAWK! LITE 125 2.0 Скачать руководство пользователя страница 2

 

Engine Manual Talon 190 and Lite 125 Ver .99b 

 

4/08/2019 

pg. 2 
 

Thank You from BlackHawk… 

Thank you for choosing BlackHawk Paramotors.  We strive to produce the finest Paramotor 
Engines available, and hope the Lite 125 and Talon 190 will provide you with years of amazing 

flight experiences.  This manual will provide the necessary information to properly care for your 

engine.  Please read this entire manual before using your Paramotor.  A thorough understanding of 

this manual will help to keep you safe and maximize the engines full life span. 

 
Please retain a copy of this manual for future reference, and to pass it down to the next owner, 

should you decide to sell this Paramotor. 
 

Fly safe, and enjoy all this sport has to offer. 
 

-The BlackHawk Team 

 

 

SAFETY NOTICE: 

This sport is as safe as 

YOU

 make it. By purchasing BlackHawk equipment, you are fully responsible 

for being a certified Paramotor Pilot, and accept all risks inherent with this type of activity (including 
possible serious injury or death). Using this equipment in any other way than what it was originally 
designed for and/ or intended use greatly increases these risks.  BlackHawk Paramotor USA Inc., it's 
employees, representatives, or dealers, shall not be held liable for personal, third party, or property 
damages or injuries in any way. 
 

Note: 

BlackHawk is not accountable or responsible for the engine work that you perform on your or 

any other Paramotor engine. If you damage your Paramotor while you are performing the work on it, 
then you are accountable for the damage. If you feel you are not qualified to perform the work, then 
please contact us or a qualified BlackHawk Dealer for assistance. 
 

Note: 

If you do not fully understand all the contents of this manual, contact your primary Powered 

Paragliding Instructor or qualified BlackHawk Dealer prior to use. Pilot safety is paramount and our 
first priority. 
 

Note: 

Make sure you completely read and fully understand the entire contents of this Lite 125 and 

Talon 190 Engine manual prior to using this equipment in any way. 

Содержание LITE 125 2.0





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды