TA05250 B Page 4 of 8
ATTACHING & DETACHING THE BATTERY PACK
3.2
B
Fig. 2
A
A
Fig. 1
SWITCH OPERATIONS
3.3
1. The indentor extends when the Start Button is pressed and stops when the Start Button is released.
2. To retract the indentor, press the Return Button. The indentor continues to retract while the Return Button is pressed.
3. The compression area within the head is illuminated by LED work lights while the tool is operational.
Start Button
Work Lights
Return Button
1. To attach the Battery, slide it into the rear of the Tool until it stops and the Latches (A) engage. (See fig. 1)
2. After inserting the Battery, check that it is securely in place by pulling it gently without pressing the Latches.
3. To detach the Battery, pull out the Battery while pressing the Latches (A). (See fig. 2)
4. The battery charge level is displayed when button (B) is pressed. The number of LEDs lit up denotes the relative battery
charge. One flashing LED indicates a maximum charge level of 10%. The battery should be charged soon.
