OPTIMAL PLAYBACK
Image Playback
For optimal image playback we recommend images to be 1080 x 608 pixels at
300 DPI and saved as a jpeg.
Video Playback
For optimal video playback it is recommended that your video is 720 x 480
pixels and runs at a frame rate of 30 frames per second in MPEG-1 format.
Video Encoder
- There is a converter availible and a PDF manual located on
the support page of our webite.
www.blackboxav.co.uk/support
Audio Playback
For optimal audio playback it is recommended that your audio file is of MP3
format and has a bit rate of 44.1Khz
REMOTE CONTROL BUTTONS
MUTE
VGA
VIDEO
DISP
BGM
MODE
PROG
BCC
RETURN
COPY
DEL
VOL+
VOL-
SETUP
ZOOM
FILE
POWER ON/OFF
MUTE Volume ON/OFF
VGA:1280X720 output
（
Factory settings:VGA:640X480
）
Video output: For YPbPr and CVBS selection
Displays the current time in the top right corner of screen.
BGM Back ground music ON/OFF
MODE All play, Folder play, Single play (Default: All play)
At stop status, press this key to set “PROGRAM PLAY “. Maximum 20
files can be selected.
SET A TO B Player
At stop status, press this key to go to “PLAY LIST “screen.
One key copy. From USB/SD card copy to CF card or built-in flash
memory (USB/SD and CF/ flash Memory should be selected one)
“DELETE “: At stop status, move arrow key to select file want to be
deleted, and then press this key. The screen will prompt
[
ARE YOU
SURE YOU WANT TO DELETE THE FILE?
]
, move arrow key to select ”
YES” to delete file.
Increase Volume
Decrease Volume
Enter SETUP menu
When ZOOM on: Picture/Photo zoom in or zoom out, using and
key to select times
Cursor UP , or let picture have Horizontal mirror image
Cursor LEFT, or let picture have 90 degree counter clockwise rota-
tion
ENTER ENTER, play start
Cursor RIGHT, or let picture have Vertical mirror image
Cursor DOWN, or let picture have 90 degree clockwise rotation
LEFT 2×
，
4×
，
6×
，
8×
RIGHT 2×
，
4×
，
6×
，
8×
List all files in card or NAND
Go to PREVIOUS file
Go to NEXT file
PLAY/PAUSE (Temporary STOP)
STOP
，
return to file list
Page 3
FACTORY RESET
Preferences > Defaults > Reset
