724-746-5500 | blackbox.com
Page 8
Power over Ethernet Surge Protectors
3. Installation
WARNING:
Never install the surge protector during a lightning storm.
This surge protector is for indoor use only.
1. Unplug the unprotected equipment’s power.
2. Disconnect the equipment’s incoming data line.
3. Install the PoE Surge Protector between the incoming data line and the equip-
ment’s port using the supplied 6" (15.2-cm) modular patch cable. Place the surge
protector as close as possible to the device being protected.
4. Connect the ground wire directly to the protected device’s chassis ground con-
nection. If you are unsure where to locate the equipment’s chassis ground con-
nection, consult the equipment’s users’ manual or contact the manufacturer.
CAUTION:
You must connect the PoE Surge Protector’s ground wire to a metal
chassis in order for it to operate properly.
Содержание SP075A
Страница 2: ......
