Blackbox PS186A, Руководство пользователя

Страница: 19 / 23

16
RACK MOUNT POWER STRIPS AND SURGE SUPPRESSORS
• Automatically cuts off power if its surge-protection components fail.
• LED goes dark to show that the unit has done its job—it has taken a major
surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can’t be accidentally turned
off.
2.2.3 P
REMIUM
R
ACK
M
OUNT
S
URGE
S
UPPRESSOR
(SP215A)
The SP215A is a rackmountable power strip for standard 19" racks. It has 6 outlets
on its rear panel, as well as these features:
• Electrical and mechanical grounding.
• Protective circuit breaker with front-panel reset button.
• UL 1449 330-volt clamping category (actually clamps at 260 volts).
• Resists EMI/RFI up to 60 dB.
• LED goes dark to show that the unit has done its job—it has taken a major
surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can’t be accidentally turned
off.
2.3 About Your Vertical Surge Suppressor Strip
The Vertical Surge Suppressor Strips are designed to protect equipment that is
sensitive to the destructive effects of power-line transients and noise on electronic
and electrical circuitry. However, they are not lightning arrestors and do not
protect equipment in the rare instance that lightning actually strikes the site’s
service entrance or antenna.
Each unit is 100% tested before packaging.