manualshive.com logo in svg

Blackbox KV7118SA, Руководство пользователя

Поделиться
Скачать
Blackbox KV7118SA Скачать руководство пользователя страница 64

63

APPENDIX C: RS/6000 Handling

Appendix C: RS/6000 Handling

The IBM RISC System/6000, better known by its shorter name “RS/6000,” differs
significantly from standard PC-type computers, but the ServSwitch Elite is designed
to support most RS/6000 systems.

The RS/6000 utilizes a slightly different power-up sequence on the keyboard to

allow identification of the RS/6000 series of keyboards. The ServSwitch Elite
recognizes this fact and responds accordingly.

RS/6000 video is even more varied than video is in the PC world, at least in

terms of the electrical and physical interfaces that have been built into different
models. The RS/6000 can adapt to most PC-style video standards (VGA, SVGA,
etc.), and also uses a few video-transmission schemes that PCs usually don’t. In
particular, the RS/6000 models with 3C3 video ports use a video format called
“sync on green.” In this format, the composite sync signal and its ground are
carried on the same wire(s) as the green color signal and its ground. Any graphics
system that uses sync on green will require an adapter in order to be attached to
the ServSwitch Elite. In the case of the RS/6000, the RS/6000 Converter Kit
(KV7160A) is designed for this purpose.

Another consideration is the physical video connector. Most contemporary PCs

have HD15 connectors, but many RS/6000 models have the 13W3 connectors that
are also found on Sun Microsystems

®

and SGI

®

machines. Even though these

RS/6000 models use the same type of video format as regular PCs—so you won’t
need the KV7160A Converter—you will still need the special HD15-to-13W3 cable
in the EHN6000-ELITE cable kit to attach an RS/6000 with a 13W3 connector to
the Switch.

Содержание KV7118SA









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды