manualshive.com logo in svg

Blackbox KV7118SA, Руководство пользователя

Поделиться
Скачать
Blackbox KV7118SA Скачать руководство пользователя страница 19

18

SERVSWITCH ELITE™

3.3 Rackmounting Switches (Optional)

Rackmount kits are available if you want to mount either model of the ServSwitch
Elite in an EIA-standard 19" equipment rack. (This is especially useful if you want
to attach the Switch to computers that are already mounted in the same or
adjoining racks.) Figure 3-1 on the next page shows how to attach the mounting
brackets from the RMK19E kit to the single-user Switch; Figure 3-2 on the next
page shows how to attach the brackets from the RMK19E4 kit to the 4x8 Switch.

Follow safety measures when you install this equipment:

• Before you mount a Switch, make sure it is turned off and unplugged.

• Before you mount a Switch or other components in a rack cabinet, stabilize

the cabinet in a permanent location. Start rackmounting your equipment at
the bottom of the cabinet, then work your way to the top. Avoid uneven
loading or overloading of cabinets.

CAUTION!

Do not exceed your cabinets’ load rates. Overloading or uneven loading
of  a  cabinet  might  result  in  shelf  or  cabinet  failure,  causing  equipment
damage and possibly personal injury.

When  you  do  connect  the  ServSwitch  Elite  to  a  power  source,

connect  it  only  to  the  type  of  power  supply  specified  on  the  unit’s
housing. Do not exceed the current or voltage capacity of the Switch or
of your site’s circuits. Overloaded power sources, extension cords, etc.,
pose fire and shock hazards.

Take these steps to rackmount your Switch:

1. Line up the holes in the “long side” of the Kit’s side brackets with the

screwholes in the sides of the ServSwitch Elite.

2. With an Allen wrench, fasten the mounting brackets to the Switch using two of

the included 8-32 x 

3

⁄

8

" button-head socket-cap screws per side.

3. Attach the included rack nut/holders to the mounting rail of the rack so that

they are positioned on the inside of the cabinet.

4. Mount the Switch assembly to the cabinet by matching the holes or grooves on

the “short side” of each bracket to an appropriate set of matching holes on
your equipment rack, then inserting the included 10-32 x 

1

⁄

2

" Phillips truss-head

screws through the holes or grooves in the bracket and the holes in the
mounting rail, into the rack nut/holders, then tightening the screws to secure
the assembly in place.

Содержание KV7118SA









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды