6
The SoundClip supports the following connections:
Up to 2 headphones can be connected
through the 3.5mm jacks. Simply connect
via the headphone 1 and 2 output.
The SoundClip range supports our
AutoPlay Headphones. For connection
instructions please refer to the individual
headphone manuals.
Wire speakers to the ‘Speaker Left’ and
‘Speaker Right’ terminal blocks. Follow
the ‘+’ and ‘
-
‘ directions as appropriate
and insert wires by screwing into place
with the supplied screwdriver.
Connect 8 buttons to the designated
terminal. To do this simply insert the wire
ends and screw in place with the
supplied screwdriver.
Connect 2 buttons to the designated
terminal. To do this simply insert the
button wire ends and screw in place with
the supplied screwdriver.
To use lighting with the SoundClip you
must wire them to the labelled ‘GPIO / 12v
Out’ terminal. As standard the lights will
be activated when content is playing and
deactivated when content stops.
To utilise a PIR trigger, you must wire the
trigger cable and ground wire into the
button 1 terminal, with the power
connection wired into the GPIO 12V out
terminal. See the PIR manual for more
instructions.
