www.interpretationshop.co.uk
6
Connecting to your own Device
Although designed primarily to be utilised
alongside our range of media players, the MKII
Headphones can be connected to a
device of your own (first we recommend you
check compatibility with us) - to do so you must
be aware of the following cable connections;
Black (Ground)
- Connect to Controller
Depending on how unit triggers:
Yellow and Black
- Content Activation (contact
is normally closed)
Or
Green and Black
- Content Activation (contact
is normally open)
Depending on how much power is required:
Red (Power)
- 12V power consumption rated @
50 milliamps
Blue (Power)
- 5V or 3.3v supply consumption
rated @ 50 milliamps
Note: Do not use 12V down a 5V line
Connecting a VideoClip
If you purchased a VideoClip set-up for
AutoPlay functionality, you will have recieved an
I/O adapter with your headphones.
The I/O adapter connects from the blue wire
straight into the I/O port on the VideoClip.
The Yellow and Black wire is connected into
Button 8, content for AutoPlay must be
programmed to folder 01.
Therefore Button inputs 01 and 08 are reserved
when in AutoPlay mode, button inputs 02 - 07
can be programmed as normal (see VideoClip
instructions for further details).
Содержание MKII
Страница 1: ...MKII Headphones Manual ...
Страница 12: ......