6
This setting allows you to perform a
battery and solar test for your Audio
Bench.
Select the Battery and Solar Test option
and you will be informed of the battery
voltage, solar power availability and the
voltage used on each panel. It will also
tell you if there is no power from a panel.
It will then tell you any delay settings and
the serial number of the unit.
Note: The Audio Bench will inform you
when the charge falls below 4V and no
longer play messages.
This setting is used to put the Solar Audio
Post into Transit Mode and effectively
shut down for transportation
When in Transit Mode messages will not
be activated, if a button is pushed you will
just see a blinking red light inside the
speaker grill.
To exit transit mode, simply insert the
Programming Dongle and press a button,
you will then be greeted by a message
that only plays when exiting Transit Mode.
Select this option if you wish to exit the
menu. If no selection is made within 2
loops of the setting options, it will
automatically exit.
