12
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
Attach your camera to the network and power it on
Apply power to the camera. When the camera powers on, it performs an internal initialization, then establishes a connection to the
LAN. Wait until the initialization process completes before continuing. It may take up to 3 minutes for your camera to initialize.
Configure the camera IP address
1.
Open the IPAdminTool directory on your computer, then double click the file
IPAdminTool.exe
to start the application.
When the IPAdmin Tool starts, it will discover all the IP devices it supports that exist on the network. The discovery process
may take a few minutes.
2.
In the Product list, find the entry with the same MAC address as the camera you installed. If the camera is not shown, click
Refresh
once a minute to update the list.
3.
Right click on the entry for your camera and select
IP Address
.
IP Setup window
4.
In the IP Setup window:
a.
Select the Static option if it is not selected. This option is required if video from the camera will be recorded by a
network DVR, or if you want to view video from the camera across a WAN (Internet).
