25
Indoor/Outdoor Mini-Dome IP Camera
SECTION 2: INSTALLATION AND SETUP
5.
On the VIEW screen, check the
SPK
and
MIC
options to enable the speaker at the camera and the microphone on your
computer.
6.
At your computer, listen for sounds from the microphone at the camera. If necessary, adjust the volume level in the camera.
Click:
SETUP
>
Video & Audio
>
Audio
to re-open the Bi-directional Audio Settings menu. In the Listen frame, adjust the volume to the preferred level. Click
Apply
.
7.
Use a microphone at your PC to send audio to the speaker at the camera. Verify that your microphone audio is heard at the
speaker.
To adjust the speaker volume go to the Bi-directional Audio Settings menu. In the Talk to frame, adjust the volume to an
appropriate level. Click
Apply
.
2.10 Cleaning
Clean the camera housing with an approved glass cleaning solution and a lint free cloth.
•
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub the surface with a soft
cloth moistened with a mild detergent solution, then rinse and dry it with a soft cloth.
•
Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing. These may cause damage
to the surface over time.
CAUTION
Do not use benzene, thinner or other chemical products on the camera assembly; these may dissolve the paint and
promote damage of the surfaces. Before using any chemical product, read the accompanying instructions carefully.
