6
SECTION 2: INSTALLATION
2.3 Plastic camera mounting
1.
Connect the dome base to the mounting surface using four
(4) screws.
2.
Route the power and video cables to the camera location
and attach them to the camera drop cable (see
General
guidelines
above).
2.4 Camera adjustments
1.
Attach a video setup monitor to the yellow RCA (EXTRA VIDEO OUT) connector inside the camera assembly, or setup a
remote monitor for viewing video from the camera.
2.
Power on the camera and video monitor.
3.
While observing video from the camera, adjust the pan/tilt swivel and PCB bracket to aim the camera in the preferred
direction.
Pan adjustment (rotate gimbal)
Tilt adjustment
