Black BLK-CDS105NH, Инструкция по эксплуатации

Страница: 20 / 23

⑤
Enter a title, move the cursor to ’POS’ and press the SET button. The
entered title appears on the screen. Select the position to display the title
on the screen by using the 4 direction buttons and press the SET button.
When the position is determined, select ’END’ and press the SET button
to return to the SPECIAL menu.
●
SYNC : In areas where the supply is at 60Hz,
you can synchronize the output phase
of multiple cameras using the power
synchronization function (Line-Lock)
without using a synchronization signal
generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase between 0 and 359.
●
MOTION DET:
If you connect an alarm device to this camera,
you can monitor activity more efficiently, because
a signal is generated by the camera whenever
motion is detected. The motion detection signal
is output through the MD OUT port.
■
How to Use the Camera
①
When the SPECIAL menu screen is displayed, press the Up and
Down buttons so that the arrow indicates MOTION DET .
②
Set up the mode using the 4 direction buttons.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY
number is high, motion detection sensitivity is increased to recognize
even small movement.
- AREA MODE : Determines whether to use the MD area selected
in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area
is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL
→
SET : Fills in a selected MD area. Fills in a selected MD
area. The color of filling is sequentially selected as brown, orange,
blue, cyan, yellowish green, yellow and red.
- RETURN : Select this to save the MOTION DET menu settings
and return to the SPECIAL menu.
●
PRIVACY : Hide an area you want to hide
on the screen.
①
When the SPECIAL menu screen is
displayed, press the Up and Down buttons
so that the arrow indicates ‘PRIVACY’.
Note
• MD areas show only MOTION DET menu. Therefore, MD areas don’t
display on the monitor screen.
Note
• When using AC power at 60Hz frequency, you can use the L/L type
synchronization.
• When the power is DC 12V, the SYNC. menu is fixed to the ‘INT’ mode.
①
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 8 areas.
- AREA MODE :
Determines whether to use the area selected
in the AREA SEL, and the size and position of
the area.
36 37
Super DNR High Resolution Day/Night Camera Super DNR High Resolution Day/Night Camera