Black BLK-CDS105NH, Инструкция по эксплуатации

Страница: 15 / 23

1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. BACKLIGHT OFF
5. DNR ON
6. DAY/NIGHT AUTO
7. IMAGE ADJ
8. SPECIAL
9. EXIT
MAIN SETUP
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the
Up and Down buttons so that the arrow indicates ‘White Bal.’ .
2. Select a desired mode using the Up and Down buttons.
※
Select one of the following 5 modes, as appropriate for your purpose.
●
ATW : Select this when the color temperature is between 1800°K and 10500°K
●
INDOOR : Select this when the color temperature is between 4500°K and 8500°K.
●
OUTDOOR : Select this when the color temperature is between 1800°K and
10500°K. (sodium light inclusion)
●
AWC
→
SET : To find the optimal setting for the current luminance environment
in this mode, set the point the camera towards a sheet of
white paper and press the SET button. If the environment
changes, readjust it.
●
MANUAL : Select this to fine-tune White Balance manually. Set White
Balance first by using the ATW or AWC mode. After that switch
to MANUAL mode, fine-tune the White Balance and then press
the SET button.
■
How to Use the Camera
White Balance (White Bal.)
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. BACKLIGHT OFF
5. DNR ON
6. DAY/NIGHT AUTO
7. IMAGE ADJ
8. SPECIAL
9. EXIT
MAIN SETUP
This camera is designed so that it delivers a distinctive subject and
background at the same time, even when the subject is in backlight, unlike
conventional cameras, by adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using
the Up and Down buttons so that the arrow indicates 'BACKLIGHT' .
2. Select a desired mode using the Left and Right buttons depending on the
camera purpose.
Note
• White Balance may not work properly under the following conditions.
In this case select the AWC mode.
①
When the color temperature of environment surrounding the subject
is out of the control range (e.g. clear sky, or sunset)
②
When the ambient illumination of the subject is dim.
③
If the camera is directed towards a fluorescent light or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
26 27
Super DNR High Resolution Day/Night Camera Super DNR High Resolution Day/Night Camera