Page 2
Rev. 031720
1-888-651-3431
Assembly
Step 1. Assemble the base.
Connect
the two 45” arched tubes (D) to the two
straight tubes (A) using eight mounting
plates (G), eight M8x100 bolts (H), and
eight lock nuts (L).
Make sure the curve of the arched
tubes is facing inward and that the
holes are facing down. The straight
bars should be positioned so the at-
tached nuts on the wheel mounting
plates are on the outside.
Do not fully tighten the bolts until full
assembly is complete to allow for easi-
er adjustments if needed.
Step 2. Attach the upper base bars.
Connect the two 33” arched tubes (C)
to the mounting plates on the base as-
sembly using four M8x60 bolts (I) and
four lock nuts (L).
