3
REMOTE PANIC
In the event of an emergency (PANIC) situation,
the system’s siren can be triggered for 45
seconds to attract attention.To activate the Panic
Feature, press transmitter button 1 for 3
seconds:
• The siren will sound.
• The parking lights will flash*.
Press button 1 to exit panic mode and rearm
the system. Press button 2 to exit panic mode
and disarm the system. The Panic Feature will
operate when the ignition is on.
*
Optional feature
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by using
the emergency override feature.
To override the system:
1. Enter the vehicle.
• Because the system is armed, the siren
will sound.
2. Turn on the ignition key.
3. Press the Valet switch for 3 seconds.
• The siren will stop sounding.
• Starter defeat bypassed.
VALET MODE
When the system is placed into the Valet Mode
the security system will be disabled.
However, the optional keyless entry and trunk
release features will still function if installed.
To enter the Valet Mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet/service mode
switch for 3 seconds.
• The siren will chirp once.
• The LED will turn on solid indicating
the system is in Valet Mode.
To exit Valet Mode:
1. Turn the ignition key on.
2. Press and hold the valet/service mode
switch for 3 seconds.
• The LED will turn off.
• The Siren will chirp 2 times.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds to
open the trunk.
OPTIONAL TRUNK DISARM
The trunk disarm feature allows the alarm to
disarm automatically whenever transmitter
button 3 is used to activate the optional trunk
release. This eliminates having to first disarm
the alarm before activating the trunk release.
This feature must be programmed during
installation.
REMOTE SENSOR BYPASS
To arm the system and bypass the shock sensor,
press button 1 to arm, then within 2 seconds
press button 1 again.The siren will chirp 5 times
and sensors will be ignored until the system is
disarmed and rearmed.
OPTIONAL SECURE OVERRIDE CODE
If your system was programmed to override
with a personal override code-pressing the
over-ride switch from 1 to 15 times.
To disarm the system with your personal over-
ride code please use the following steps:
1. Open Door, Alarm system will trigger
2.Turn ignition key to on
3. Press the over-ride switch to the selected
number of times and hold on the last one for
10 seconds until the alarm turns off.
BW4150 Owners.qxd 6/5/03 11:53 AM Page 3
