2
PASSIVE ARMING
The passive arming feature allows the system to
arm automatically without user intervention.
This programmable feature may be enabled during
installation.
To arm the system passively:
1. Turn the ignition key off.‡
2. Exit the vehicle and close all doors.
• The LED will start flashing rapidly to
indicate that the system is preparing to
arm. (The system can be armed at any
time by pressing transmitter button 1.)
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed.
• The doors will lock.†*
‡
The ignition must have been on for at least 10
seconds prior to exiting the vehicle or Passive Arming
will be bypassed.
†
If the Passive Locking feature was enabled during
installation.
DISARMING OPERATION
To disarm the system press transmitter button 2.
• The siren will chirp twice.¥
• The parking lights will flash twice.¥*
• The doors will unlock.†*
• The dome light will turn on for 30
seconds.*
¥
If the alarm was triggered while away, the system will
respond with 3 chirps and 3 parking light flashes.
†
If the Passenger Unlock Feature is enabled, pressing the
unlock button will unlock only the driver's door. Pressing the
unlock button again unlocks all doors.
*
Optional feature
TAMPER ALERT
If the alarm was triggered while away from the
vehicle, the siren will chirp 3 times on disarming
for tamper indication. After disarming the
alarm, enter vehicle and turn ignition on. The
LED will flash the zone that was triggered 5
times (see LED chart).
AUTO REARM
The Auto Rearm feature allows the system to
automatically re-arm itself in the event the
system is disarmed and a door is not opened
within 30 seconds. This programmable feature may
be disabled during installation. The Passive Arming
feature and Auto Rearm feature are related. In order
to disable the Auto Rearm feature, the Passive Arming
feature must also be disabled during installation.
NOTE: This feature will not work on vehicles with
the illuminated entry feature enabled.
SILENT ARMING/DISARMING
Press transmitter button 5 (the Shift Button)
then the Arm or Disarm button for one-time
silent operation. The system can also be
programmed for full-time silent operation
during installation.
CHIRP DELETE
For full time silent operation, the ARM/ DISARM
chirps can be permanently disabled. This feature
must be programmed during installation.
IGNITION LOCK*
The ignition locking feature allows the doors to
automatically lock when the ignition key is
turned on, and automatically unlock when the
ignition key is turned off. This feature may be
disabled during installation.
*
Optional feature
BW4150 Owners.qxd 6/5/03 11:53 AM Page 2
