Dip Switch Settings
Switch #1 = Lock/Unlock Pulse Time:
ON = .75 seconds
OFF = 3 seconds
Switch #2 = Ignition Triggered Door Locks: ON = Ignition Lock
OFF = No Ignition Lock
Switch #3 = Passive Door Locks:
ON = Passive Lock
OFF = No Passive Lock
Switch #4 = Passive or Active Arming:
ON = Passive Arming
OFF = Active Arming
Dip Switch Settings
Make sure to set all dip switches in proper
position prior to mounting the module.
Switch #1= Lock/Unlock Pulse Time:
On = .75 Seconds
Off = 3 Seconds
Switch #2: Door Unlock Pulse
On = Ignition Lock
Off = No Ignition Lock
Switch #3: Passive Door Locks
On = Passive Door Locking
Off = No Passive Door Locking
Switch #4: Passive Arming
On = Passive Arming
Off = Active Arming Only
Programmable Features
The following features are programmed with
the use of the remote transmitter.
Program #1: Parking Light Operation
On = Car finder feature
Off = Normal
Program #2: Door Unlock Pulse
On = Single
Off = Double
Program #3: Auxiliary 2 Output
On = Auxiliary 2 Output
Off = Horn Honk Output
Program #4: Trunk Disarm Feature
On = Disabled
Off = Enabled
Program #5: Normal/Silent Arming
On = Normal operation
Off = Silent operation
Program #6: Auto Re-arm
On = Auto Re-arm enabled
Off = Auto Re-arm disabled
To enter program mode:
1. Turn ignition to the on position.
2. Wait 2 seconds.
3. Within 10 seconds press program switch
5 times.
4. The siren will give one long chirp indicating
the system is now in program mode.
To change programmable features:
Press valet switch the number of times that
equal to the feature to be changed. The siren
will chirp each time the switch is pressed.
(Example: to turn feature #3 off press the valet
switch 3 times).
• Press button 1 on the remote to turn the
feature on, the siren will chirp once.
• Press button 2 on the remote to turn
feature off. Siren will chirp twice.
System will automatically exit program mode.
NOTE: You must re-enter program mode for
each feature you wish to change.
2
