5. OPERATING INSTRUCTIONS
WARNING! Ensure that you read, understand and apply the safety instructions
and warnings before use.
WARNING! Do not attempt to overload the lift.
5.1 Position the lift in a suitable area, turning the adjusting screw (25)
down
to make sure
the lift is stable and level on the surface, checking that the surface on which the lift
will stand is solid and flat (preferably concrete).
5.2 Wheel the ATV or motorcycle up the leading plate and onto the platform.
WARNING! The motorcycle must be fully supported by the lift platform
(01)
before
lifting. DO NOT put the rear wheel of the motorcycle on the leading
plate
(03)
and DO NOT use the leading plate
(03)
to support the
weight of the motorcycle when lifting.
WARNING! The leading plate (03) is only used to help you to wheel the motorcycle
onto the platform when the lift is at its lowest position.
5.3 Strap the ATV or motorcycle securely to the platform.
NOTE: Before raising the lift, move the safety handle (41) to your right side.
5.4 Connect the quick coupler-male (40) into the air supply hose quick coupler-female,
then turn on the air valve assy (39) to raise the lift. When air source is not available,
pump the lift foot pedal (32) to raise the lift.
5.5 When the platform has been raised to the working height, turn off the air valve or
stop pumping.
NOTE: At this moment, make sure the safety handle (41) is on your right side and
the locking plate (09) is locked in corresponding pair of safety latch (14) to
prevent accidental lowering.
5.7 When work is done, remove all tools from under the lift before lowering. Raise the lift
by pumping the lift foot pedal (32) several times or by air to let the locking plate (09)
free from its locking position, then move the safety handle
(41)
to your left side and
fix it in the dent,
SLOWLY
press the release foot pedal (34) to
GENTLY
lower the
lift.
NOTE:
Lower the ATV or motorcycles slowly, in a controlled fashion. Never allow the
ATV or motorcycle to drop quickly.
5.7 When the lift is fully lowered, untie the ATV or motorcycle, open the vise jaws and
remove the ATV or motorcycle from the lift.
Содержание BW-1500AO-V2
Страница 6: ......
