1. SAFETY INSTRUCTIONS AND WARNINGS
1.1 Use a qualified person to maintain the lift in good condition. Keep it clean for best
and safest performance.
1.2 The maximum load is 1500lbs.
DO NOT
exceed this rated capacity.
1.3 Use this lift for lifting purpose only.
DO NOT
use it for any other purpose it is not
designed to perform.
1.4 Keep children and unauthorized persons away from the work area.
1.5 Remove ill fitting clothing. Remove ties, watches, rings and other loose jewelry,
and contain long hair.
1.6 Wear ANSI approved safety goggles when operating the lift.
1.7 Keep proper balance and footing, do not overreach and wear nonskid footwear.
1.8 Only use this lift on a surface that is stable, level, dry and not slippery, and capable
of sustaining the load. Keep the surface clean, tidy and free from unrelated materials
and ensure that there is adequate lighting.
1.9 Before lifting load, stabilize the lift by turning the adjusting screws down. The lift
must only be used in a static position for lifting and lowering loads. Ensure that the
load remains stable at all times.
1.10 Ensure the load is adequately secured to the lift with appropriate straps.
1.11 When the load has been raised to the working height, make sure the safety handle
(41) is on your right side and the locking plate is locked in corresponding position
to
prevent accidental lowering.
1.12 Before lowering lift ensure that there are no obstructions underneath and that all
persons are standing clear.
1.13
Always keep your hands and feet away from moving parts.
1.14
DO NOT
use the lift if damaged, any suspect parts are noted or it has been
subjected to a shock load.
1.15
DO NOT
operate the lift when you are tired or under the influence of alcohol, drugs
or any intoxicating medication.
1.16
DO NOT
allow untrained persons to operate the lift.
1.17
DO NOT
make any modifications to the lift.
1.18
DO NOT
expose the lift to rain or snow.
1.19 If the lift needs repairing and/or there is any part which needs to be replaced, have
it repaired by authorized technicians and only use the replacement parts supplied by
the manufacturer.
1.20
WARNING:
the warnings, cautions and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Содержание BW-1500AO-V2
Страница 6: ......
