Black Stone 5020, Быстрый старт

Страница: 4 / 16

CONVERSION INSTRUCTIONS
STEP 12
Turn on the natural gas supply and check for leaks
with soapy water prior to turning on your griddle at all
connections that you have completed. Bubbles will appear
in the soapy water if any leaks are present. If you have any
leaks, turn off your natural gas supply immediately and fix
any leaks before use. If you are unable to fix the leaks, call
a qualified professional who is licensed and insured.
OFF
ON
STEP 8
With an adjustable wrench, remove the existing hose and
regulator assembly from the body and keep it with your
owner’s manual.
STEP 9
Attach the swivel fitting from the new 10 ft Natural Gas hose
to the griddle with an adjustable wrench.
STEP 11
Connect your griddle to the NG supply from the source by
moving the dust covers and making sure both fittings are
free from any debris. Pull the locking collar back on the
fitting and push the male quick connect fitting all the way
inside and then release the locking collar. Pull the hose and
fitting apart to verify they are connected.
NG Supply
(from house)
Shutoff Valve
Male Quick
Connect Fitting
OFF
OFF
Pull in opposite directions to verify
the fittings are properly connected.
3/8" Quick Connect
Fitting (included)
Thread Reducer
(if required)
Locking Collar
Swivel fitting
OFF
STEP 10
If your Natural Gas supply line is not already set up with the
correct size Quick Connect/Disconnect fitting, the correct
one is included in the kit. Use thread sealant if attaching
the provided Quick Connect/Disconnect fitting. To have the
proper fitting added to your Natural Gas source, have this
done by a licensed and insured professional. Shown below
is an example of what this should look like.