10
11
OPERATING INSTRUCTIONS
Unpacking
Carefully unpack your air compressor. This air compressor is
bulky and heavy, two (2) person lift required. Dispose of all
packing material in an environmentally responsible manner.
Assembly
Your air compressor requires minor assembly before initial
operation. Check that you have all required components
required for assembly and initial use.
Your compressor is filled with oil do not tip to assemble.
Oil breather
To fit the oil breather:
1. Oil breather is already fitted, see pic 2.
Lubrication
Warning:
Your air compressor IS FILLED with OIL!
To check the oil level:
1. Always check the oil level when the air compressor is on
flat and level ground.
Look at the sight glass and ensure the oil is above the red
dot on the sight glass, as per the “OIL LEVEL GAUGE” label,
see Pic. 3 and Pic. 4.
To add oil, if required, additional oil not included:
1. Remove oil fill cap, see pic 2.
2. Add oil, SAE30 to at least the top of the red dot, see
Pic. 4.
3. Oil level will take about 1 minute to drain down and
settle.
4. Check oil level in sight glass, see Pic. 3. Re-check and
top up if required, until level is correct.
5. Replace oil filler cap.
WARNING
Do not attempt to operate this compressor until it is fully
assembled.
Damage caused due to incomplete assembly will not be
covered under warranty.
Ensure the air compressor is disconnected from
the power supply before carrying out any assembly,
maintenance or adjustments on the machine.
Never under fill or over fill with oil.
PIC. 2
Oil breather
Oil fill cap
Oil sight glass
Air Filter
Oil drain bolt
Oil drain bolt
Oil sight glass
PIC. 3
PIC. 4
