10
SECTION 2: INSTALLATION
b.
Lift the camera head slightly away from the base and turn it to the direction of your surveillance target.
NOTE
: If any
resistance is felt when turning the camera head, loosen the lock screws until the camera head turns freely. You can
turn the camera head up to 360° left or right. Tighten the pan lock screws until snug to hold the camera head in place.
Tilt adjustment
(image up or down)
Pan adjustment
(image left or right)
3.
Tilt adjustment
(moves video up or down): Rotate the camera about the gimbal axis to center your surveillance target in
the video image.
4.
Horizon adjustment
(aligns the horizon in the image:
a.
Loosen (do not remove) the rotate lock screw.
b.
Turn the rotate ring to align the horizon in the video image.
c.
Tighten the lock screw until snug.
5.
Use a small blade screwdriver to adjust the zoom and focus of your camera.
6.
Make additional pan, tilt, focus and zoom adjustments as needed to perfect the video image.
