3
WILD HOTS-Item code:BH84 Instruction Manual.
+ This is not a toy
+ Be sure that no other flyers are using your
radio frequency.
+ Wear safety glasses.
+ Keep loose clothing and wires away from
the propeller.
+ Do not start the motor if people are near.
Do not stand in line with the side of the propel-
ler.
+ Make motor adjustments from behind the
propeller only. Do not reach around the spin-
ning propeller.
SAFETY PRECAUTION.
1. Install the rubber grommets and brass
eyelets onto the aileron servo.
THERE ARE TWO OPTIONS:
1.
INSTALLING THE AILERON SERVOS.
C/A glue
C/A glue
C/A glue
2. Using a modeling knife, remove the cov-
ering at possition show below.
3. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
REPLACEMENT SMALL PARTS
Center line
Bottom side.
REPLACEMENT LARGE PARTS
A. Wing panel.
B. Fuselage.
C. Horizon stabilizer.
D. Vertical stabilizer
G. Decal sheet.
A
B
C
C
