5
TRAVEL AIR-
Item code:BH06-A.
Instruction Manual
1
2. Using a modeling knife, remove the cov-
ering servo tray.
1
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
1
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Servo tray.
Electric wire.
Thread
Secure.
Drill a hole
1.5mm diameter
