6
THERMAL 3.0-
Item code:BH131.
Instruction Manual
4. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.Install servo into aileron
servo tray as same as picture below.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Electric wire.
Thread.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2x10mm.
Repeat the procedure for the other wing
half
.
A+B Epoxy
PLUS
glue
A
B
A+B Epoxy
PLUS
glue
Aileron
control horn
INSTALLING THE AILERON CONTROL HORN.
