Black Horse Model TAYLORCRAFT BH 134, Инструкция по эксплуатации

Страница: 5 / 33

5
TAYLORCRAFT
- Item code: BH 134
.
Instruction Manual

 2. Using a modeling knife, remove the cov-
ering servo tray.

3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.

4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Secure.

5. Instal servo tray with aileron servo into
the wing as same as picture below.
Repeat the procedure for the other wing
half
.
2x10mm.
Thread.
Electric
wire.
Secure.
Aileron
control horn
2.INSTALLING THE AILERON CONTROL HORN.
Servo tray.
Remove covering
Servo tray.