Black Horse Model T-28 Trojan 120, Инструкция по эксплуатации

Страница: 20 / 34

TROJAN. Instruction Manual
20

4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
When cutting through the covering to
remove it, cut with only enough pressure
to only cut through the covering it’s self.
Cutting into the balsa structure may
weaken it. This could lead to possible
failure during flight.
Remove
covering.
Bottom side.

3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a left-tip pen.

2. Draw a center line onto the horizontal
stabilizer. Put the horizontal into the fuselage.
Top side.
Center line.
C/A glue
C/A glue
Pen.
Bottom side.