Black Horse Model SPEED AIR BH.08, Инструкция по эксплуатации, Страница: 5 / 19

SPEED AIR-40. Instruction Manual.
5
† † † † †
3) Apply masking tape at the wing join to
hold the wing halves together securely.
Masking tape.
Epoxy glue.
INSTALLING THE AILERON LINKAGE.
†
1) Thread one nylon adjustable control
horn onto each aileron torque rod. Thread the
horns on until they are flush with the ends of
the torque rods.
†
2) Thread one nylon clevis at least 5/16”
onto each of the two 2mm x 100mm threaded
wires.
†
3) With the aileron servo centered, install
the servo arm onto the servo. The arm should
be installed so it is parallel with the trailing edge
of the wing.
Top side.
Masking tape.
Bottom side.
Bend and cut after.