22
SEA FURY -
Item code:BH102
INSTRUCTION MANUAL.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
Secure.
Secure
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
100 mm
2x8mm.
Rudder
control horn.
Secure.
MOUNTING THE TAIL WHEEL
BRACKET.
3x15mm
2 x 8mm
Bottom side
R u d d e r
pushrod.