Black Horse Model Sea Fury BH102, Инструкция по эксплуатации

Страница: 30 / 34

30
SEA FURY -
Item code:BH102 INSTRUCTION MANUAL.
Air supply
Valve one way
3 way connector
Air tank
Control Valve
3 way connector
3 way connector
Right main
gear wing
Left main
gear wing
Secure.
Connector
Secure.

   1) Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.

   2) Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
Do not permanently secure the receiver and
battery until after balancing the model.

   1. Plug the servo leads and the switch
lead into the receiver. You may want to plug
an aileron extension into the receiver to make
plugging in the aileron servo lead easier
when you are installing the wing . Plug the
battery pack lead into the switch.

   2. Wrap the receiver and battery pack in
the protective foam to protect them from vi-
bration. Use a rubber band or masking tape to
hold the foam in place.
INSTALLING THE RECEIVER AND BATTERY.
S w i t c h
engine.
Switch
S w i t c h
Receiver.

 
 4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.